Application Tips

QC Release Powder II

Look below for some helpful tips so you can use QC Release Powder II to its fullest potential.

  • Make sure the sub-grade is prepared as required as for any concrete slab on grade.

  • Tamp and/or vibrate concrete (be careful not to overwork material), screed, then wood float to finished grade.
  • While QC Release Powder II may be used on vertical faces of step risers, curbs, etc., it is not practical for use on large areas of vertical surfaces.

  • QC Release Powder II should remain in a dry state on the concrete surface, and should not be worked into the surface. Care should be taken not to trowel the release powder into the wet concrete.